These are replacement screws, nuts, and washers for newer era (single screw type) Revere Ware pan handles. THIS HARDWARE WILL NOT WORK ON THE 2-SCREW TYPE HANDLES AS THE SCREWS AND NUTS ARE TOO SHORT. These parts are newly manufactured and are made to look and work just like original Revere Ware hardware, with the exceptions noted below.
This includes TWO HARDWARE SETS, enough for two separate pans.
Material: Stainless steel
Includes: Two sets of: one screw, one barrel nut, one lock washer; enough for two separate pans.
Measurements: Screws are .26 inches (7 mm) long including head. Barrel nuts are .3 inches (8 mm) long including head.
Fits: Newer era small pan handles. These fit post-1968 era Revere Ware pans with handles that have one screw through the metal part sticking out of the pan metal part of the handle.
These screws will only work with the single screw newer style handle. These screws and nuts will not fit in the older two-screw handles.
Replaces: The original Revere part number for this screw set was 36080.
The screws in the hardware set are Phillips head, not slotted like original Revere Ware screw sets were. Because the original slot head screws strip very easily, we consider this an improvement. These are intended for use with new replacement handles or to fix pans whose handles have a loose rivet or a damaged hardware set.
The single-screw handles these are intended for most often are secured to the pot with a rivet. Some effort is required to remove the rivet to replace it with this hardware. The easiest way to remove the old rivets is to drill them out with a 5/32 drill bit. Note that we are selling these in pairs of two sets, to help reduce the shipping cost per single item.
Revere Ware pan/skillet 1-screw handle replacement hardware set
Includes nut, screw, and washer.